Tonmind IP Security Microphone SIP-M01 Audio Monitoring Solution Product Introduction & Key Strengths The Tonmind SIP-M01 is a professional indoor IP security microphone designed for security audio monitoring, widely deployed in financial venues, judicial institutions, public security sites, Safe City projects and routine inspection scenarios. It adopts high-sensitivity omnidirectional capacitive pickup, supporting 100 square meters full-range long-distance audio capture with clear and low-noise sound quality. Built-in AGC automatic gain control balances near and far-field volume to ensure consistent audio collection. Featuring strong anti-interference performance and wide temperature adaptability, the device delivers stable 24/7 operation for indoor security monitoring. For easy deployment, SIP-M01 supports standard IEEE802.3af PoE power supply and network cable transmission, simplifying on-site wiring and reducing construction costs. A customizable LED indicator strip supports adjustable flashing modes to visually display different device statuses and alarm events. It also supports remote management and online upgrades for long-term maintainability. Multi-Protocol Compatibility & System Integration The SIP-M01 supports comprehensive network protocols including SIP, ONVIF, HTTP, HTTPS, IPv4, TLS, RTSP, RTP, RTCP, DHCP, DNS, NTP, TCP, UDP, IGMP, ICMP, and ARP, allowing easy integration into existing security and communication systems. - ONVIF Compatibility: Connects directly with mainstream NVR and VMS video management platforms. It enables synchronous audio-video preview and playback, working with the original CCTV system without extra hardware to realize real-time audio surveillance and event verification. - SIP Protocol Support: Compatible with standard SIP servers and IP PBX systems. It can register and link with IP phones, IP speakers and other SIP terminals to support emergency voice calls and interactive voice scheduling. AI Audio Analytics & Intelligent Alarm Linkage The SIP-M01 features a built-in AI audio recognition engine capable of identifying abnormal sounds such as Shout, Cry, Animal sounds, Glass Breaking, Gun Shot, Explosion, Alarm, and Beep. Audio analytics technology isolates and identifies specific sound patterns from ambient environmental noise, similar to how the human ear recognizes different sounds. Once abnormal sounds such as verbal aggression, screams, breaking glass, or gunshots are detected, the SIP-M01 can automatically trigger predefined alarm actions within seconds. Users can customize the sensitivity level and configure different response actions including File playback, Beep warning, LED alerts, SIP calling, HTTP URL triggering, Output triggering, and Email notifications. The system can automatically play warning audio, change LED flashing colors, dial preset SIP numbers, trigger third-party systems through HTTP commands, activate IO outputs, or send alarm emails to security personnel. Typical Applica...

Tonmind SIP-T30 Network I/O Relay Module Solution Smart Integration for Security, Audio & Automation Systems 1. Challenges & Problems In modern security, monitoring, and building automation systems, users often face a common problem: many different alarm devices and equipment work separately, and cannot be managed in one unified system. Emergency buttons, temperature detectors, gas sensors, CCTV cameras, speakers, and access control devices are isolated from each other. It is difficult to collect all alarm status centrally, and hard to make these devices cooperate automatically. As a result, event detection is delayed, and emergency response is slow. Users need an all-in-one device to connect, unify, control, and manage all this equipment easily. 2. Product Introduction The Tonmind Network I/O Relay Module SIP-T30 is a powerful and integrated network controller designed to solve these problems. It combines signal input, remote control, audio intercom, broadcasting, and network communication into one stable unit. ● It provides 16 GPIO input ports to receive signals from emergency buttons, temperature sensors, gas detectors, and other alarm devices. ● It provides 8 relay output ports to send remote control commands to drive alarms, door locks, parking barriers, lights, and other equipment. ● It supports MIC input, Headset output, and Speaker output for real-time voice broadcast and two-way intercom. ● It has a DC Output port that can directly supply power to small external sensors and modules. ● It supports both PoE and DC 12V power input for flexible and easy installation. The SIP-T30 supports rich network protocols: SIP, ONVIF, HTTP, HTTPS, IPv4, TLS, RTSP, RTP, RTCP, DHCP, DNS, NTP, TCP, UDP, IGMP, ICMP, ARP. ● SIP protocol allows the module to connect with SIP servers and IP PBX systems. Alarms and events can be sent to the server, and IP phones can send control commands or make live broadcast calls through the T30. ● ONVIF protocol makes the module fully compatible with CCTV systems. It connects alarm devices, IP cameras, VMS, and NVR together, so users can check device status, send control instructions, and respond to events in one unified platform. ● All configurations can be set easily through a user-friendly web management interface. 3. Typical Application Scenarios Application Scenario 1 – Emergency Alarm Integration An emergency button can be connected to the GPIO Input of the SIP-T30 through a wired connection. Once the button is pressed, the T30 sends the alarm event through the network to the VMS or CCTV monitoring system using the ONVIF protocol. This allows operators in the monitoring center to receive alarm notifications immediately and quickly check related camera feeds for faster emergency response. Workflow: Emergency Button → GPIO Input → SIP-T30 → Network → VMS / CCTV System Application Scenario 2 – Video Analytics Trigger Security Alarm An IP camera can detect emergency events such as a person falling, dangerous behav...